LT APP FILM, OIL AND FOIL DESIGN CAPACITORS
APP Capacitors - Film + Foil + Oil Design
• Uses Imported hazy BOPP film as main Dielectric
• Uses Non-PCB, Non Toxic PXE Oil as Impregnant
• Uses High Purity (> 99%) Aluminium Foil as Electrode for High Current inrush
• Basic elements are vacuum impregnated with NPCB PXE oil.
• Extended foil Technology.
• Internal Fuse to Each element is possible for better safety.
• Capacitors can withstand the dynamic fluctuations of load.
• Withstands Higher Over voltage i.e. up to 20 % of Rated Voltage.
• Withstands Higher Over loads i.e. 75 - 100 % of Rated Current.
• Low energy consumption i.e. Watt Loss.
• Guaranteed Output for a longer period i.e. 10 - 15 yrs.
|Reference IS||IS 13585||These Capacitors are suitable for Three Phase Power Factor Correction where there is Dynamic fluctuation of load and system Voltage variation is around 20 %.
• Paper Industries
• Steel Industries
• Re-rolling Mills
• Sugar Industries
• Cement Plants
• Welding Machines
• Spinning Mills
• Textile Mills
• Arc Furnaces
• Induction Furnaces
• D.C. Drives
• Harmonic Filters etc.
|Output Range||1 Kvar to 25 Kvar|
|Working Voltage||Upto 1000 Volts AC|
|No. of Phases||Single / Three.|
|Temp. Category||55 Deg. C Max.|
|Permitted Over Voltage||1.20 Times of rated voltage|
|Permitted Over Current||1.50 Times of rated current.|
|Losses||< 0.50 w / kvar|
|Cooling||Natural air + PXE Oil|
|Installation||Indoor, Floor Mounting|
|In-rush Current||300 times of rated current.|
APP (Film + Oil + Foil) Design